FAQ

Thank you for purchasing the FieldMate

1. To start using the FieldMate download the SmartFarm app in the Apple App Store or Google Play Store

2. Create an account within the SmartFarm App

3. Install the FieldMate on your Field see “Tips for installing the FieldMate”

4. Add the FieldMate in the app by tapping the “Add sensor” button and following the on screen instructions

Note, it can take up to 24 hours before the FieldMate is activated and starts transmitting data

Tips for installing the FieldMate

• Find a representative location for your FieldMate
  • Not beneath trees or close to buildings
  • Not close to a road to prevent theft
  • Within 3 meters of a spray track to avaid damage of sweeping spraying arms
• Drill a 40cm deep hole with your standard earth auger (70mm) and place your fieldmate. Fill the hole with loose soil and ensure that the FieldMate is placed upright.

Thank you for purchasing the SoilMate

1. To start using the SoilMate download the SmartFarm app in the Apple App Store or Google Play Store

2. Create an account within the SmartFarm App

3. Install the SoilMate on your Field see “Tips for installing the SoilMate”

4. Add the SoilMate in the app by tapping the “Add sensor” button and following the on screen instructions

Note, it can take up to 24 hours before the SoilMate is activated and starts transmitting data

Tips for installing the SoilMate

• Find a representative location for your SoilMate
  • Not beneath trees or close to buildings
  • Not close to a road to prevent theft
  • Tilt the SoilMate upside down before inserting it into the ground to activate it

Thank you for purchasing the RainMate

1. To start using the RainMate download the SmartFarm app in the Apple App Store or Google Play Store

2. Create an account within the SmartFarm App

3. Install the RainMate on your Field see “Tips for installing the RainMate”

4. Add the RainMatein the app by tapping the “Add sensor” button and following the on screen instructions

Note, it can take up to 24 hours before the SoilMate is activated and starts transmitting data

Tips for installing the RainMate

• Find a representative location for your RainMate
  • Not beneath trees or close to buildings
  • Not close to a road to prevent theft
  • Attach the RainMate as shown in the picture below. Note ensure the RainMate exceeds the hight of the FieldMate or mounting pole.
    

1. Tap the underlined text above the dashboard

2. Tap "add a sensor" at the bottom of the list

3. Follow the onscreen instructions 

1. Tap "Order now"

2. Select the sensor(s) that you wish to purchache to module for and tap "Order"

3. Confirm your order, tap the box to accept the conditions and finally tap "Confirm this order" 

4. The module will be activated in the app